Phase 2 Proposal Instructions for Cycle 10 | ||||
|
12.6 Tabular Reference Data
12.6.1 Spectral Elements for WFC and HRC
Note that except for the polarizers, only one filter may be specified for an exposure. The polarizers must be used in combination with a filter on the other filter wheel in order to maintain focus. Thus the UV polarizers (POL0UV, POL60UV, POL120UV) must be used with a filter on wheel 2 excluding: F814W, FR914N, POL0V, POL60V, POL120V. The visible polarizers (POL0V, POL60V, POL120V) must be used with a filter on wheel 1 except for: F850LP, F892N, POL0UV, POL60UV, POL120UV.
Table 12.3: Spectral Elements for use with ACS/WFC and ACS/HRC Configurationsa
a. Note: Normally only one spectral element may be specified for an exposure. The exceptions are:
1) As noted in 12.4Mode = ACQ Configuration = ACS/HRC, three filter pairs are permitted for ACQ mode exposures of bright targets.
2) The polarizers must be used with another spectral element. This is required to maintain focus. The UV polarizers (POL0UV, POL60UV, POL120UV) must be used with a spectral element on wheel 2 except for: POL0V, POL60V, POL120V, and any inner or outer ramp filter segment (see Table 12.4). The visible polarizers (POL0V, POL60V, POL120V) must be used with a spectral element on wheel 1 except for: F850LP, F892N, POL0UV, POL60UV, and POL120UV.
12.6.2 Ramp Filter Wavelength Ranges
Table 12.4: Wavelength Ranges for the WFC/HRC Ramp Filters
12.6.3 Spectral Elements for ACS/SBC
Table 12.5: Spectral Elements for use with the ACS/SBC Configuration
F115LP MgF2 F125LP CaF2 F140LP BaF2 F150LP crystal quartz F165LP Suprasil F122M Ly-a PR130L CaF2 PRISM PR110L LiF2 PRISM
Space Telescope Science Institute http://www.stsci.edu Voice: (410) 338-1082 help@stsci.edu |