Phase 2 Proposal Instructions for Cycle 10

12.5 Mode = ACCUM
Configuration = ACS/SBC

---

The SBC uses a MAMA detector which is a photon-counting device that provides a two-dimensional ultraviolet capability. The MAMA accumulates photons in the ACS data buffer as they are received, producing images with 1024x1024 pixels. For a more detailed description, see the discussion of SBC ACCUM mode in the ACS Instrument Handbook.

12.5.1 Aperture or FOV

The permitted apertures for this mode are SBC or SBC-FIX.

SBC must be specified if spectral element PR110L or PR130L is specified.

12.5.2 Spectral Element

See Table12.5: Spectral Elements for use with the ACS/SBC Configuration.

12.5.3 Wavelength

No wavelength should be specified for this mode.

12.5.4 Optional Parameters

There are no Optional Parameters in this Mode.

Unlike WFC or HRC, SBC exposures with a dispersing spectral element (PR110L or PR130L) will not have an additional image exposure scheduled automatically (see Optional Parameter AUTOIMAGE under ACCUM mode for HRC and WFC). If an image exposure is desired in combination with a prism exposure, it must be entered separately. It is best to place it immediately before or after the prism exposure, and in the same visit.

12.5.5 Number of Iterations

Enter the number of times this Exposure Specification should be iterated.

12.5.6 Time Per Exposure

Enter the exposure time to apply to each iteration.

Note that Time_per_Exposure for individual SBC exposures must be an integer multiple of 0.1 second and must be in the range of 0.1 to 3600 sec.