!-------------------------------------------------------------------------------
!
!  AC_WF3 RESOURCE FILE
!
!
!  This file is used to construct the trigger, error, and success status
!  fields in the observation status file.
!
!
!-------------------------------------------------------------------------------
!                          REVISION HISTORY
!-------------------------------------------------------------------------------
!   DATE    PR   Developer  Description
! -------- ----- ---------- ----------------------------------------------------
! 02/01/07 56870 Sherbert   based on ac_acs, even using ac_acs.csh
! 02/13/07 49671 Sherbert   Use FT now instead of holding tank
! 02/19/08 57556 Sherbert   Add ASNs and favor ASNs over singletons
! 10/29/08 55769 MSwam      Run a generic version
! 01/12/09 60896 Sherbert   Use ac_xxx.py
! 09/08/11 69025 Sherbert   remove an old comment
! 02/05/13 70908 Sherbert   prevent incomplete ASNs from automatically ingesting
! 05/05/13 70908 Sherbert   remove FGS dependencies
!
!-------------------------------------------------------------------------------

PROCESS_NAME = ac_wf3            ! Short name for process id
TASK = <xpoll -p $PATH_FILE -r ac_wf3>
COMMAND = ac_xxx.py              ! Name of the command procedure
DESCRIPTION = 'WF3 post-calib/drizzle task'
SYSTEM = OPUS
CLASS = WF3

OSF_RANK = 1                     ! OSF Triggers
OSF_TRIGGER1.AC = w              ! wait in calibration
OSF_TRIGGER1.DATA_ID = w3a       ! WF3 association normally

OSF_TRIGGER2.AC = w              ! wait in calibration
OSF_TRIGGER2.DATA_ID = wf3       ! WF3 singletons, too

OSF_PROCESSING.AC  = p           ! Set flag while 'Processing'

XPOLL_STATE.00 = OSF_NORMAL      ! Normal: Completed calibration successfully
OSF_NORMAL.AC      = c           ! 
OSF_NORMAL.FT      = w           ! Wait for next stage

XPOLL_STATE.01 = OSF_ERROR       ! Error during post-calibration
OSF_ERROR.AC       = e           ! 

XPOLL_STATE.03 = OSF_MISSING_PRODUCT ! Let Ops decide if this is OK
OSF_MISSING_PRODUCT.AC  = m      ! asn_member.product_status set to N

XPOLL_ERROR.AC = x               ! Set osf to this if exit state is undefined.

POLLING_TIME       = 10          ! Wait (seconds) before polling for next 

MINBLOCKS          = big_MINBLOCKS ! blocks required on output disk
ENV.INPATH         = WF3_SIS_DIR   ! Where the .trx file is found
ENV.OUTPATH        = WF3_CAL_DIR   ! Directory where output files are written

! asn_product_status.py needs
ENV.OK_TO_UPDATE_DATABASE     = OK_TO_UPDATE_DATABASE ! defined in PATH file
ENV.UPDATE_ASN_PRODUCT_STATUS = update_asn_product_status
!
ENV.ARCH_SERVER = ARCH_SERVER
ENV.ARCH_DB = ARCH_DB
ENV.OPUS_SERVER = OPUS_SERVER
ENV.OPUS_DB = OPUS_DB
ENV.KW_SERVER = KW_SERVER
ENV.KW_DB   = KW_DB

! do we still need these?
ENV.TERM    = vt100  ! PyRAF doesn't seem to get this correctly from environment 
ENV.DISPLAY = ""     ! PyRAF fails with XWindows exception if it cannot open DISPLAY